The motorshall have insulation class B and protection class IP68 and include integrated thermal protection switches.The system shall be constructed from corrosion-resistant materials suitable for grey water.The system shall include coated hydraulic components for corrosion protection.The system shall support operation in abrasivefluids when configured as variantThe system shall provide a discharge connectionsuitable for vertical piping integration andelectrical interfaces compatible with standard industrial power systems.The Supplier shall ensure that the submersible motor pumpandall associated components comply withall applicable local, national, and international laws, regulations, and standardsin forceat the timeof delivery.The equipmentshall meetall relevant directives related to electrical safety, environmental protection, and mechanicalintegrity (e.g., CE marking where applicable).Compliance with relevant standardssuch as DIN,ISO, and IEC is mandatory.e All defects shall be corrected at no coste Responsetimefor critical failures shall not exceed 48 hoursSpareparts availability shall be guaranteed for a minimum of10 years.The Contractor shall comply with all occupational safety regulations.The equipment mustensuresafe operation under submerged conditions. Hazardous substancesshall be avoided or declared in accordance with EU regulations.Requirement/ Specification Parameter ID Submersible centrifugal pump ||Pump Type [A: SYS-SMP-18] ||Rated Flow (Q) [A: SYS-SMP-19] 50 m3/h Submersible, squirrel cage induction motor Motor Type [A: SYS-SMP-20]